MakeRoad

Turn 3D Printing Waste into Fun.

Fill transparent shells with 3D printing waste and turn them into playful food-inspired designs,

from dumplings and buns to candies,  and popsicles.

1.Food, Reimagined

Dumplings, buns, candy, and popsicles take on a playful new form through 3D printing.

2.Waste, on display

The transparent shell lets your leftover filament become part of the design instead of being thrown away.

3.Shake It Your Way

Fill, shake, hang, and customize—turn leftover filament into a playful piece that's uniquely yours.

Tip

Pause the print at the specified height, place the prepared 3D printing scraps inside the model, then resume printing until complete.

Printing Guide

Recommended Filaments

PLA+ Transparent / PETG Transparent

Dumpling

Slicer Settings

Layer Height: 0.12 mm

Wall Loops: 1

Infill Density: 0

Vertical Shell Thickness: Off

Outer Wall Speed: 50 mm/s

Inner Wall Speed: 50 mm/s

Overhang Speed Reduction: Off

Estimated Printing Time

42 min / 1 h

Model Dimensions

63 *33*337 mm

Bun

Slicer Settings

Layer Height: 0.12 mm

Wall Loops: 1

Infill Density: 0

Estimated Printing Time

1 h33 min

Model Dimensions

80* 70 *50 mm

Candy

Slicer Settings

Layer Height: 0.2 mm

Wall Loops: 1

Infill Density: 0

Estimated Printing Time

1 h 33 min

Model Dimensions

39*39 *98 mm

Popsicle

Slicer Settings

Layer Height: 0.2 mm

Wall Loops: 1

Infill Density: 0

Estimated Printing Time

1 h5 min

Model Dimensions

39*11*95 mm