'%3e%3cpath%20id='Vector'%20d='M1.22928%203.22131L1.22757%203.21797L7.76216%201.07654L7.99145%201.00125C7.99829%200.999582%208.00513%200.999582%208.01198%201.00125L8.23955%201.07654L14.7724%203.21797L14.7707%203.22131C14.9025%203.27485%2015%203.40032%2015%203.55591V12.0781C15%2012.0898%2014.9932%2012.1015%2014.9812%2012.1066L8.44488%2014.8185L8.21902%2014.9122L8.01198%2014.9975C8.00342%2015.0008%207.99487%2015.0008%207.98802%2014.9975L7.78098%2014.9122L7.55512%2014.8185L1.01882%2012.1066C1.00685%2012.1015%201%2012.0915%201%2012.0781V3.55424C1.00171%203.40032%201.09924%203.27485%201.22928%203.22131ZM8.48937%2013.8548L14.0931%2011.5294C14.1051%2011.5244%2014.112%2011.5143%2014.112%2011.5009V4.36731C14.112%204.34556%2014.0897%204.33051%2014.0692%204.33887L8.46541%206.66433C8.45343%206.66935%208.44659%206.67938%208.44659%206.69277V13.8264C8.44659%2013.8481%208.46883%2013.8632%208.48937%2013.8548ZM8.01369%205.90813L13.3077%203.70983C13.3334%203.69811%2013.3334%203.66131%2013.306%203.65294L8%201.91471L2.69567%203.65294C2.6683%203.66131%202.66659%203.69811%202.69396%203.70983L7.98973%205.90813C7.99658%205.91148%208.00684%205.91148%208.01369%205.90813ZM1.91029%2011.5294L7.51406%2013.8548C7.53459%2013.8632%207.55683%2013.8481%207.55683%2013.8264V6.69277C7.55683%206.68106%207.54999%206.66935%207.53801%206.66433L1.93425%204.33887C1.91371%204.33051%201.89147%204.34556%201.89147%204.36731V11.5009C1.89147%2011.5127%201.89831%2011.5244%201.91029%2011.5294Z'%20fill='white'%20stroke='white'%20stroke-width='0.2'/%3e%3c/g%3e%3cdefs%3e%3cclipPath%20id='clip0_3121_63554'%3e%3crect%20width='16'%20height='16'%20fill='white'/%3e%3c/clipPath%3e%3c/defs%3e%3c/svg%3e)
3D PreviewChristmas Decoration Wall Mounted RGBW Lamp (Model ID：M1005692408)
Free
.png)
Recommended Materials
SUNLU-PLA+SUNLU-PLA MarbleSUNLU-PLA Wood
Compatible Printers
6
0
0
4
03D PreviewSUNLU-PLA+SUNLU-PLA MarbleSUNLU-PLA Wood60040Last updated on 2026.01.30
82
Claim3D PreviewSUNLU-PLA+SUNLU-PLA MarbleSUNLU-PLA Wood60040
Description
This is a 5 pieces Christmas decoration lamp. It can be attached with two 5mm and 10mm head screws. The distance between the screws is 26mm
Dimension: aprox. 100x100x135mm
Print settings:
- layer height: 0.16
- nozzle: 0.4mm
- infill: 15%
- wall: 3
- support: manual (Only the top surface of the base needs to be)
- I used for base Wood PLA and PLA Marble
Light Source
- Light source: remote controlled RGBW Puck Light
- There is a hole in the middle of the body for the Puck Light
Assembly:
- watch the first gif in the galery
If you like my model, please give me a like, and check out my profil!
Tags
Licensing
This work has been obtained Intellectual Property License AgreementCreative Commons BY-NC
Creation Statement
This is my original work.
Print Makes (0)
Uploaded Print MakesLet's publish your first make.
.png)
.png)
.png)
© 2026 makeroad.com
© 2026 makeroad.com
Comment(0)